Fixed Securement Anchorages
Oval L-Pockets: Small, discreet anchorage that sits on the floor surface.
Flush L-Pockets: Recessed anchorage ideal for modern composite floors.
Covered L-Pockets: Recessed anchorage featuring a cover that keeps it clear of debris.
APPLICATION & AVAILABILITY
Vehicle Applications:
School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
Regional Availability:
Worldwide
Brochure
Warranty
The 3 Variants of L-Pockets:
OMNI APPROVED!
OMNI APPROVED L-Track, Slide ‘N Click and L-Pocket Anchorages can now be used with both Q’STRAINT & SURE-LOK retractors!*
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
*IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
L-Pockets Features & Details
Features
Flush L-Pocket
The Flush L-Pocket is the a recessed L-Track pocket with a single bolt design. Designed to recess only 3/8” (9.5mm) the pocket is ideal for modern composite floors and features sweeping guides on each side to allow for easy cleaning.
Oval L-Pocket
The sleek design of the Oval L-Pocket minimizes tripping and interference with wheelchair casters. Side L-Track guides keep your tie-down fittings centered and secured. A single bolt installation and surface mount design eliminates the need to modify flooring surfaces.
Covered L-Pocket
The Covered L-Pocket is a recessed L-Track anchorage that works with most typical floor applications of 1/2” (13mm) and stays free of debris when not in use. An integrated magnet securely holds the hinged cover in the closed position and installation requires just two bolts.
Fixed Securement
All 3 versions of L-Pockets can be installed in any vehicle application, providing permanent anchorage points in virtually any environment.
OMNI Approved
You can use L-Pocket Anchorages with all Q’STRAINT QRT-Series Retractors as well as all SURE-LOK Retractors.
Maximum Durbaility
Every L-Pocket Anchorage is made from cast steel for maximum strength and corrosion resistance.
Specifications
L-Pockets Meet or exceed the following standards and regulations:
ADA
Americans with Disabilities Act (ADA) –
“Accessibility Specifications for Transportation Vehicles”
Applicable NHTSA Federal Motor Vehicles Safety Standards
RESNA Vol. 4, Sec.18 Formerly SAEJ2249 – Recommended Practice –
Wheelchair Tie-down and Occupant Restraint Systems for use in Motor Vehicles
ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons –
Wheelchair Tie-down and Occupant Restraint Systems
Canadian Standard Association (CSA) –
“Mobility Aid and Occupant Restraint (MASOR) systems”
Ancrages de fixation permanents
L-Pockets ovales: Petit ancrage discret qui repose sur la surface du sol.
L-Pockets encastrés: Ancrage encastré idéal pour les planchers composites modernes.
L-Pockets recouverts: Ancrage encastré avec un couvercle qui le protège des débris.
APPLICATION & DISPONIBILITÉ
Types de véhicules:
Autobus scolaire, Autobus de ville, Autocars, Rail, Transport communautaire, Minivan, WAV
Disponibilité régionale:
À l’échelle mondiale
Garantie
Les 3 variantes de L-Pockets:
CERTIFIÉ OMNI!
Les ancrages certifiés OMNI L-Track, Slide ‘N Click et L-Pocket peuvent maintenant être utilisés avec les enrouleurs Q’STRAINT et SURE-LOK!*
Conçus pour les agences qui exigent une flexibilité totale dans un environnement de marques mixtes, les ancrages certifiés OMNI permettent de sécuriser vos passagers sans hésitation. Recherchez simplement le badge OMNI Approved pour savoir quels ancrages sont compatibles avec les systèmes Q’STRAINT et SURE-LOK.
*IMPORTANT: Les 4 enrouleurs dans une fixation à 4 points doivent être de Q’STRAINT ou SURE-LOK – ne jamais mélanger les marques. Les ancrages OMNI sont strictement testés et certifiés pour être utilisés avec les systèmes Q’STRAINT et SURE-LOK approuvés. Les autres systèmes non approuvés ne doivent jamais être utilisés avec des ancrages OMNI.
Caractéristiques et Détails des L-Pockets
L-Pocket encastré
Le L-Pocket encastré est une poche L-Track encastrée à un seul boulon. Conçu pour ne creuser que de 9,5 mm (3/8 po), le L-Pocket est idéal pour les planchers composites modernes et comporte des guides de balayage de chaque côté pour faciliter le nettoyage.
L-Pocket ovale
Le design élégant du L-Pocket ovale minimise les interférences avec les roulettes pour fauteuils roulants. Les guides latéraux L-Track gardent vos fixations centrées et sécurisées. Une installation à boulon unique et une conception de montage en surface éliminent le besoin de modifier les surfaces de plancher.
L-Pocket recouvert
La L-Pocket recouvert est un ancrage L-Track encastré qui s’utilise avec les applications de plancher les plus courantes de 1/2 “(13 mm) et reste libre de tout débris lorsqu’il n’est pas utilisé. Un aimant intégré maintient fermement le couvercle à charnière dans la position fermée et l’installation ne nécessite que deux boulons.
Fixation permanente
Les 3 versions de L-Pockets peuvent être installées dans n’importe quel type de véhicule et ils fournissent des points d’ancrage permanents dans pratiquement n’importe quel environnement.
Certifié OMNI
Vous pouvez utiliser des ancrages L-Pocket avec tous les enrouleurs Q’STRAINT de la série QRT ainsi que tous les enrouleurs SURE-LOK.
Durabilité maximale
Chaque ancrage L-Pocket est fabriqué en acier moulé pour une solidité maximale et une résistance à la corrosion.
Les L-Pockets respectent ou dépassent les normes et réglementations suivantes:
ADA
Americans with Disabilities Act (ADA) –
“Accessibility Specifications for Transportation Vehicles”
Normes de sécurité des véhicules automobiles fédérales de la NHTSA applicables
RESNA Vol. 4, Sec.18 anciennement SAEJ2249 – Recommended Practice –
Wheelchair Tie-down and Occupant Restraint Systems for use in Motor Vehicles
ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons –
Wheelchair Tie-down and Occupant Restraint Systems
Canadian Standard Association (CSA) –
“Mobility Aid and Occupant Restraint (MASOR) systems”
Ancrages de fixation permanents
L-Pockets ovales: Petit ancrage discret qui repose sur la surface du sol.
L-Pockets encastrés: Ancrage encastré idéal pour les planchers composites modernes.
L-Pockets recouverts: Ancrage encastré avec un couvercle qui le protège des débris.
APPLICATION & DISPONIBILITÉ
Types de véhicules:
Autobus scolaire, Autobus de ville, Autocars, Rail, Transport communautaire, Minivan, WAV
Disponibilité régionale:
À l’échelle mondiale
Garantie
Les 3 variantes de L-Pockets:
CERTIFIÉ OMNI!
Les ancrages certifiés OMNI L-Track, Slide ‘N Click et L-Pocket peuvent maintenant être utilisés avec les enrouleurs Q’STRAINT et SURE-LOK!*
Conçus pour les agences qui exigent une flexibilité totale dans un environnement de marques mixtes, les ancrages certifiés OMNI permettent de sécuriser vos passagers sans hésitation. Recherchez simplement le badge OMNI Approved pour savoir quels ancrages sont compatibles avec les systèmes Q’STRAINT et SURE-LOK.
*IMPORTANT: Les 4 enrouleurs dans une fixation à 4 points doivent être de Q’STRAINT ou SURE-LOK – ne jamais mélanger les marques. Les ancrages OMNI sont strictement testés et certifiés pour être utilisés avec les systèmes Q’STRAINT et SURE-LOK approuvés. Les autres systèmes non approuvés ne doivent jamais être utilisés avec des ancrages OMNI.
Caractéristiques et Détails des L-Pockets
L-Pocket encastré
Le L-Pocket encastré est une poche L-Track encastrée à un seul boulon. Conçu pour ne creuser que de 9,5 mm (3/8 po), le L-Pocket est idéal pour les planchers composites modernes et comporte des guides de balayage de chaque côté pour faciliter le nettoyage.
L-Pocket ovale
Le design élégant du L-Pocket ovale minimise les interférences avec les roulettes pour fauteuils roulants. Les guides latéraux L-Track gardent vos fixations centrées et sécurisées. Une installation à boulon unique et une conception de montage en surface éliminent le besoin de modifier les surfaces de plancher.
L-Pocket recouvert
La L-Pocket recouvert est un ancrage L-Track encastré qui s’utilise avec les applications de plancher les plus courantes de 1/2 “(13 mm) et reste libre de tout débris lorsqu’il n’est pas utilisé. Un aimant intégré maintient fermement le couvercle à charnière dans la position fermée et l’installation ne nécessite que deux boulons.
Fixation permanente
Les 3 versions de L-Pockets peuvent être installées dans n’importe quel type de véhicule et ils fournissent des points d’ancrage permanents dans pratiquement n’importe quel environnement.
Certifié OMNI
Vous pouvez utiliser des ancrages L-Pocket avec tous les enrouleurs Q’STRAINT de la série QRT ainsi que tous les enrouleurs SURE-LOK.
Durabilité maximale
Chaque ancrage L-Pocket est fabriqué en acier moulé pour une solidité maximale et une résistance à la corrosion.
Les L-Pockets respectent ou dépassent les normes et réglementations suivantes:
ADA
Americans with Disabilities Act (ADA) –
“Accessibility Specifications for Transportation Vehicles”
Normes de sécurité des véhicules automobiles fédérales de la NHTSA applicables
RESNA Vol. 4, Sec.18 anciennement SAEJ2249 – Recommended Practice –
Wheelchair Tie-down and Occupant Restraint Systems for use in Motor Vehicles
ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons –
Wheelchair Tie-down and Occupant Restraint Systems
Canadian Standard Association (CSA) –
“Mobility Aid and Occupant Restraint (MASOR) systems”
FESTE SICHERHEITSVERANKERUNGEN
Ovale L-Aussparungen: Kleine, diskrete Verankerung, die auf der Bodenfläche aufsitzt.
Bündige L-Aussparungen: Versenkte Verankerung, ideal für moderne Verbundböden.
Abgedeckte L-Aussparungen: Versenkte Verankerung mit einer Abdeckung, die Schmutz fernhält.
ANWENDUNG & VERFÜGBARKEIT
Fahrzeuganwendungen:
Schulbus, Stadtbus, Reisebus, Bahn, Gemeinschaftstransport, Minivan, rollstuhlgerechtes Fahrzeug
Regionale Verfügbarkeit:
Weltweit
BROSCHÜRE
GARANTIE
DIE 3 VARIANTEN VON L-AUSSPARUNGEN:
OMNI-ZUGELASSEN!
OMNI-ZUGELASSENE L-Schiene, Slide ‘N Click und L-Aussparungsverankerungen können jetzt auch mit Q’STRAINT & SURE-LOK Retraktoren verwendet werden!*
Entwickelt für Agenturen, die in einem gemischten Markenumfeld völlige Flexibilität benötigen. OMNI-zertifizierte Verankerungen beenden unsicheres Rätselraten wenn es um die Sicherung Ihrer Fahrgäste geht. Achten Sie einfach auf die OMNI-Zertifikatsplakette, um sicherzugehen, welche Verankerungen sowohl mit Q’STRAINT- als auch mit SURE-LOK-Systemen kompatibel sind.
*WICHTIG: Bei einer 4-Punkt-Sicherung müssen alle 4 Retraktoren entweder Q’STRAINT oder SURE-LOK sein – kombinieren Sie niemals die Marken. OMNI-Verankerungen sind für die Verwendung mit zugelassenen Q’STRAINT- und SURE-LOK-Systemen streng geprüft und zertifiziert. Andere nicht zugelassene Systeme sollten niemals mit OMNI-Verankerungen verwendet werden.
L-Bodenpaltten Funktionen und Details
BÜNDIGE L-AUSSPARUNG
Die bündige L-Aussparung ist eine versenkte L-Schienenaussparung mit einer einzigen Schraube. Die Vertiefung wurde für eine Aussparung von nur 9,5 mm (3/8″) konzipiert und ist somit ideal für moderne Verbundböden geeignet, da sie auf jeder Seite mit Kehrführungen ausgestattet ist, die eine einfache Reinigung ermöglichen.
OVALE L-AUSSPARUNG
Das schlanke Design des Ovalen L-Aussparung minimiert Stolpern und Behinderung der Rollstuhlrollen. Seitliche L-Schienenführungen halten Ihre Niederzurrungsanschlussstücke zentriert und gesichert. Durch die Montage mit einer einzigen Schraube und dem Konzept der Oberflächenmontage müssen Fußbodenoberflächen nicht verändert werden.
ABGEDECKTE L-AUSSPARUNG
Die abgedeckte L-Aussparung ist eine versenkte L-Schienenverankerung, die mit den meisten gängigen Bodenanwendungen von 1/2″ (13 mm) funktioniert und bei Nichtgebrauch frei von Schmutz bleibt. Ein integrierter Magnet hält den Klappdeckel sicher in der geschlossenen Stellung und benötigt nur zwei Schrauben.
FESTE VERANKERUNG
Alle 3 Versionen von L-Aussparungen können in jedem Fahrzeug montiert werden und bieten in praktisch jeder Umgebung dauerhafte Verankerungspunkte.
OMNI-ZUGELASSEN
Sie können L-Aussparungsverankerungen mit allen Q’STRAINT QRT-Serien Retraktoren sowie allen SURE-LOK Retraktoren verwenden.
MAXIMALE HALTBARKEIT
Jede L-Aussparungsverankerung besteht aus Stahlguss, um maximale Festigkeit und Korrosionsbeständigkeit zu garantieren.
DIE L-BODENPLATTEN ERFÜLLT ODER ÜBERTRIFFT DIE FOLGENDEN NORMEN UND VORSCHRIFTEN:
ADA
Das Gesetz für Amerikaner mit Behinderungen (Americans with Disabilities ACT – ADA) –
„Zugänglichkeitsspezifikationen für Transportfahrzeuge“
Anwendbare Sicherheitsstandards für Kraftfahrzeuge NHTSA (Federal Motor Vehicles Safety Standards)
RESNA Vol. 4, Sec.18, ehemals SAEJ2249 – Empfohlene Praxis –
Rollstuhlbefestigungs- und Insassenrückhaltesysteme für den Einsatz in Kraftfahrzeugen
ISO 10542 – Technische Systeme und Hilfsmittel für Behinderte –
Rollstuhl-Niederzurrung und Insassenrückhaltesysteme
Canadian Standard Association (CSA) –
„Mobilitätshilfen und Insassen-Rückhaltesysteme (Mobility Aid and Occupant Restraint – MASOR)“
SIND SIE BEREIT, MEHR ZU ERFAHREN?
Sprechen Sie noch heute mit einem Sicherungsspezialisten.
LOS GEHT ESFixed Securement Anchorages
Oval L-Pockets: Small, discreet anchorage that sits on the floor surface.
Flush L-Pockets: Recessed anchorage ideal for modern composite floors.
Covered L-Pockets: Recessed anchorage featuring a cover that keeps it clear of debris.
APPLICATION & AVAILABILITY
Vehicle Applications:
School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
Regional Availability:
Worldwide
Brochure
Warranty
The 3 Variants of L-Pockets:
OMNI APPROVED!
OMNI APPROVED L-Track, Slide ‘N Click and L-Pocket Anchorages can now be used with both Q’STRAINT & SURE-LOK retractors!*
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
*IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
L-Pockets Features & Details
Features
Flush L-Pocket
The Flush L-Pocket is the a recessed L-Track pocket with a single bolt design. Designed to recess only 3/8” (9.5mm) the pocket is ideal for modern composite floors and features sweeping guides on each side to allow for easy cleaning.
Oval L-Pocket
The sleek design of the Oval L-Pocket minimizes tripping and interference with wheelchair casters. Side L-Track guides keep your tie-down fittings centered and secured. A single bolt installation and surface mount design eliminates the need to modify flooring surfaces.
Covered L-Pocket
The Covered L-Pocket is a recessed L-Track anchorage that works with most typical floor applications of 1/2” (13mm) and stays free of debris when not in use. An integrated magnet securely holds the hinged cover in the closed position and installation requires just two bolts.
Fixed Securement
All 3 versions of L-Pockets can be installed in any vehicle application, providing permanent anchorage points in virtually any environment.
OMNI Approved
You can use L-Pocket Anchorages with all Q’STRAINT QRT-Series Retractors as well as all SURE-LOK Retractors.
Maximum Durbaility
Every L-Pocket Anchorage is made from cast steel for maximum strength and corrosion resistance.
Specifications
L-Pockets Meet or exceed the following standards and regulations:
ADA
Americans with Disabilities Act (ADA) –
“Accessibility Specifications for Transportation Vehicles”
Applicable NHTSA Federal Motor Vehicles Safety Standards
RESNA Vol. 4, Sec.18 Formerly SAEJ2249 – Recommended Practice –
Wheelchair Tie-down and Occupant Restraint Systems for use in Motor Vehicles
ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons –
Wheelchair Tie-down and Occupant Restraint Systems
Canadian Standard Association (CSA) –
“Mobility Aid and Occupant Restraint (MASOR) systems”
ANCLAJES DE ASEGURAMIENTO FIJO
Oval L-Pockets: anclaje pequeño y discreto que se fija a la superficie del piso.
Flush L-Pockets: anclaje empotrado, ideal para suelos modernos de materiales compuestos.
Covered L-Pockets: anclaje empotrado con una cubierta que lo conserva libre de suciedad.
APLICACIONES Y DISPONIBILIDAD
Aplicaciones de vehículos:
Autobuses escolares, autobuses urbanos, autocares, tren, transporte colectivo, vehículos monovolumen, vehículos adaptados
Disponibilidad geográfica:
Todo el mundo
Folleto
GARANTÍA
LAS 3 VARIANTES DE L-POCKETS:
¡APROBADO OMNI!
Los anclajes APROBADOS OMNI L-Track, Slide ‘N Click y L-Pocket ahora pueden utilizarse con retractores Q’STRAINT y SURE-LOK.*
Diseñados para instituciones que requieran total flexibilidad en un entorno multimarca, los anclajes aprobados OMNI eliminan la incertidumbre a la hora de proteger a sus pasajeros. Simplemente busque el distintivo Aprobado OMNI para saber qué anclajes son compatibles simultáneamente con los sistemas Q’STRAINT y SURE-LOK.
*IMPORTANTE: Los 4 retractores de un aseguramiento de 4 puntos deben ser Q’STRAINT o SURE-LOK, nunca una combinación de marcas. Los anclajes OMNI se someten pruebas estrictas y se certifican para su uso con los sistemas aprobados Q’STRAINT y SURE-LOK. Nunca deben utilizarse otros sistemas no aprobados junto con anclajes OMNI.
CARACTERÍSTICAS Y DETALLES DE SLIDE ‘N CLICK
Flush L-Pocket
Flush L-Pocket es un bolsillo empotrado L-Track con un diseño de perno único. Diseñado para un empotramiento de tan solo 3/8″ (9,5 mm), el bolsillo es ideal para suelos modernos de materiales compuestos y cuenta con guías de barrido en cada lado para permitir una fácil limpieza.
Oval L-Pocket
El elegante diseño de Oval L-Pocket reduce al mínimo los tropiezos y las interferencias con las ruedas de la silla. Las guías laterales L-Track mantienen sus conexiones de anclaje centradas y aseguradas. Su instalación de un perno único y su diseño de montaje superficial elimina la necesidad de modificar las superficies del piso.
Covered L-Pocket
Covered L-Pocket es un anclaje L-Track empotrado que se adapta a la mayoría de aplicaciones típicas para piso de 1/2″ (13 mm) y se mantiene libre de suciedad cuando no está en uso. Un imán incorporado sujeta la cubierta con bisagras de manera segura en la posición cerrada; la instalación únicamente requiere dos pernos.
ASEGURAMIENTO FIJO
Las 3 versiones de L-Pockets pueden instalarse en cualquier aplicación de vehículo, proporcionando puntos de anclaje permanentes en prácticamente cualquier entorno.
APROBADO OMNI
Puede usar los anclajes L-Pocket con todos los retractores Q’STRAINT QRT-Series y con todos los retractores SURE-LOK.
MÁXIMA DURABILIDAD
Todos los anclajes L-Pocket están realizados en acero fundido para obtener fuerza y resistencia a la corrosión máximas.
L-POCKETS CUMPLE O SUPERA LOS SIGUIENTES ESTÁNDARES Y REGULACIONES
ADA
Ley de Protección de Estadounidenses con Discapacidades (ADA) –
“Especificaciones de accesibilidad para vehículos de transporte”
Normas de seguridad federales aplicables a vehículos a motores de la NHTSA
RESNA Vol. 4, Sec.18, anteriormente SAEJ2249 – Práctica recomendada –
Sistemas amarre de sillas de rueda y de retención de sus ocupantes para su uso en vehículos a motor
ISO 10542 – Sistemas técnicos y ayudas para personas discapacitadas –
Sistemas amarre de sillas de rueda y de retención de sus ocupantes
Asociación Canadiense de Normalización (CSA) –
“Sistemas de ayuda a la movilidad y de retención de ocupantes (MASOR)”
ANCLAJES DE ASEGURAMIENTO FIJO
Oval L-Pockets: anclaje pequeño y discreto que se fija a la superficie del piso.
Flush L-Pockets: anclaje empotrado, ideal para suelos modernos de materiales compuestos.
Covered L-Pockets: anclaje empotrado con una cubierta que lo conserva libre de suciedad.
APLICACIONES Y DISPONIBILIDAD
Aplicaciones de vehículos:
Autobuses escolares, autobuses urbanos, autocares, tren, transporte colectivo, vehículos monovolumen, vehículos adaptados
Disponibilidad geográfica:
Todo el mundo
Folleto
GARANTÍA
LAS 3 VARIANTES DE L-POCKETS:
¡APROBADO OMNI!
Los anclajes APROBADOS OMNI L-Track, Slide ‘N Click y L-Pocket ahora pueden utilizarse con retractores Q’STRAINT y SURE-LOK.*
Diseñados para instituciones que requieran total flexibilidad en un entorno multimarca, los anclajes aprobados OMNI eliminan la incertidumbre a la hora de proteger a sus pasajeros. Simplemente busque el distintivo Aprobado OMNI para saber qué anclajes son compatibles simultáneamente con los sistemas Q’STRAINT y SURE-LOK.
*IMPORTANTE: Los 4 retractores de un aseguramiento de 4 puntos deben ser Q’STRAINT o SURE-LOK, nunca una combinación de marcas. Los anclajes OMNI se someten pruebas estrictas y se certifican para su uso con los sistemas aprobados Q’STRAINT y SURE-LOK. Nunca deben utilizarse otros sistemas no aprobados junto con anclajes OMNI.
CARACTERÍSTICAS Y DETALLES DE SLIDE ‘N CLICK
Flush L-Pocket
Flush L-Pocket es un bolsillo empotrado L-Track con un diseño de perno único. Diseñado para un empotramiento de tan solo 3/8″ (9,5 mm), el bolsillo es ideal para suelos modernos de materiales compuestos y cuenta con guías de barrido en cada lado para permitir una fácil limpieza.
Oval L-Pocket
El elegante diseño de Oval L-Pocket reduce al mínimo los tropiezos y las interferencias con las ruedas de la silla. Las guías laterales L-Track mantienen sus conexiones de anclaje centradas y aseguradas. Su instalación de un perno único y su diseño de montaje superficial elimina la necesidad de modificar las superficies del piso.
Covered L-Pocket
Covered L-Pocket es un anclaje L-Track empotrado que se adapta a la mayoría de aplicaciones típicas para piso de 1/2″ (13 mm) y se mantiene libre de suciedad cuando no está en uso. Un imán incorporado sujeta la cubierta con bisagras de manera segura en la posición cerrada; la instalación únicamente requiere dos pernos.
ASEGURAMIENTO FIJO
Las 3 versiones de L-Pockets pueden instalarse en cualquier aplicación de vehículo, proporcionando puntos de anclaje permanentes en prácticamente cualquier entorno.
APROBADO OMNI
Puede usar los anclajes L-Pocket con todos los retractores Q’STRAINT QRT-Series y con todos los retractores SURE-LOK.
MÁXIMA DURABILIDAD
Todos los anclajes L-Pocket están realizados en acero fundido para obtener fuerza y resistencia a la corrosión máximas.
L-POCKETS CUMPLE O SUPERA LOS SIGUIENTES ESTÁNDARES Y REGULACIONES
ADA
Ley de Protección de Estadounidenses con Discapacidades (ADA) –
“Especificaciones de accesibilidad para vehículos de transporte”
Normas de seguridad federales aplicables a vehículos a motores de la NHTSA
RESNA Vol. 4, Sec.18, anteriormente SAEJ2249 – Práctica recomendada –
Sistemas amarre de sillas de rueda y de retención de sus ocupantes para su uso en vehículos a motor
ISO 10542 – Sistemas técnicos y ayudas para personas discapacitadas –
Sistemas amarre de sillas de rueda y de retención de sus ocupantes
Asociación Canadiense de Normalización (CSA) –
“Sistemas de ayuda a la movilidad y de retención de ocupantes (MASOR)”
Fixed Securement Anchorages
Oval L-Pockets: Small, discreet anchorage that sits on the floor surface.
Flush L-Pockets: Recessed anchorage ideal for modern composite floors.
Covered L-Pockets: Recessed anchorage featuring a cover that keeps it clear of debris.
APPLICATION & AVAILABILITY
Vehicle Applications:
School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
Regional Availability:
Worldwide
Brochure
Warranty
The 3 Variants of L-Pockets:
OMNI APPROVED!
OMNI APPROVED L-Track, Slide ‘N Click and L-Pocket Anchorages can now be used with both Q’STRAINT & SURE-LOK retractors!*
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
*IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
L-Pockets Features & Details
Features
Flush L-Pocket
The Flush L-Pocket is the a recessed L-Track pocket with a single bolt design. Designed to recess only 3/8” (9.5mm) the pocket is ideal for modern composite floors and features sweeping guides on each side to allow for easy cleaning.
Oval L-Pocket
The sleek design of the Oval L-Pocket minimizes tripping and interference with wheelchair casters. Side L-Track guides keep your tie-down fittings centered and secured. A single bolt installation and surface mount design eliminates the need to modify flooring surfaces.
Covered L-Pocket
The Covered L-Pocket is a recessed L-Track anchorage that works with most typical floor applications of 1/2” (13mm) and stays free of debris when not in use. An integrated magnet securely holds the hinged cover in the closed position and installation requires just two bolts.
Fixed Securement
All 3 versions of L-Pockets can be installed in any vehicle application, providing permanent anchorage points in virtually any environment.
OMNI Approved
You can use L-Pocket Anchorages with all Q’STRAINT QRT-Series Retractors as well as all SURE-LOK Retractors.
Maximum Durbaility
Every L-Pocket Anchorage is made from cast steel for maximum strength and corrosion resistance.
Specifications
L-Pockets Meet or exceed the following standards and regulations:
ADA
Americans with Disabilities Act (ADA) –
“Accessibility Specifications for Transportation Vehicles”
Applicable NHTSA Federal Motor Vehicles Safety Standards
RESNA Vol. 4, Sec.18 Formerly SAEJ2249 – Recommended Practice –
Wheelchair Tie-down and Occupant Restraint Systems for use in Motor Vehicles
ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons –
Wheelchair Tie-down and Occupant Restraint Systems
Canadian Standard Association (CSA) –
“Mobility Aid and Occupant Restraint (MASOR) systems”
ANCORAGENS DE SEGURANÇA FIXADAS
Encaixes em L ovais: ancoragem pequena que fica na superfície do piso.
Encaixe em L Flush: ancoragem recuada ideal para pisos modernos.
Encaixe coberto em L: ancoragem recuada que oferece uma cobertura que impede detritos
APLICAÇÃO E DISPONIBILIDADE
Aplicações em veículos:
Ônibus escolares, Ônibus municipais, Trilhos, Transporte Comunitario, Minivans, Veículos adaptados .
Disponibilidade por região:
Mundo inteiro
PANFLETO
Garantia
As 3 variantes dos encaixes em L:
OMNI APROVADO!
OMNI APROVADO Trilho em L, Slide n’ Click e Ancoragens em L agora podem ser usadas com retratores Q’STRAINT e SURE-LOK!*
Desenvolvido para agencias que requerem total flexibilidade em marcas mistas, as ancoragens aprovadas OMNI, tiram o trabalho de adivinhar como assegurar seus passageiros. Só procurar pelo selo OMNI Aprovado para saber quais ancoragens são compatíveis com sistemas Q’STRAINT e SURE-LOK
*IMPORTANTE: Todos os 4 retratores num sistema de segurança de 4 pontos devem ser ou todos da Q’STRAINT ou da SURE-LOK – nunca misture as marcas. Ancoragens OMNI são estritamente testadas e certificadas para serem usadas com sistemas aprovados Q’STRAINT e SURE-LOK. Outros sistemas não aprovados não devem ser usados com ancoragens OMNI.
L-Pockets CARACTERÍSTICAS E DETALHES
ENCAIXE EM L FLUSH
É um trilho em L recuado com um design de um parafuso só. Desenvolvido para recuar apenas 9.5mm, o encaixe é ideal para pisos modernos compostos, e oferece guias para varrer de cada lado com facilidade.
ENCAIXE L OVAL
O brilhante design do encaixe oval minimiza tropeços e interferência com o rodizio de cadeiras de rodas. Guias para Trilhos em L laterais mantém os seus acessórios centralizados e seguros. Uma instalação de um único parafuso unida com o design de montagem em superfície elimina a necessidade de modificar superfícies do piso.
ENCAIXE L COBERTO
É uma ancoragem que funciona com as aplicações mais comuns de piso, de 13mm e fica livre de detrimentos quando não utilizada. Um imã integrado, mantém com segurança a cobertura articulada na posição fechada e sua instalação requer apenas 2 parafusos.
FIXAÇÃO ASSEGURADA
Todas as 3 versões de Encaixes em L podem ser instaladas em qualquer aplicação de veiculo, oferecendo pontos de ancoragem permanentes em quase qualquer ambiente.
OMNI APROVADO
Você pode usar Ancoragens de Encaixe L com todos os retratores da série Q’STRAINT QRT assim como com os retratores SURE-LOK
DURAÇÃO MAXIMA
Todo ancoragem de encaixe L é feita de aço fundido para máxima força e resistência à corrosão.
L-Pockets Meet or exceed the following standards and regulations:
ADA
Ato dos Americanos com capacidade limitada
“Especificações de Acessibilidade para Veículos de Transporte”
Padrões Federais aplicáveis de Segurança em veículos Motorizados NHTSA
RESNA Vol.4 Seção 18, antiga SAEJ2249-Pratica Recomendada-
Sistemas de segurança para Cadeira de Rodas e Ocupante para uso em Veículos Motorizados
ISSO 10542 – Sistemas Tecnicos e Auxilio para Pessoas deficientes ou com capacidade reduzida-
Sistemas de segurança para Cadeira de Rodas e Ocupante
Associação Padrão Canadense (CSA)
“Sistema de Auxilio de mobilidade e segurança de Ocupante (MASOR)”
Fixed Securement Anchorages
Oval L-Pockets: Small, discreet anchorage that sits on the floor surface.
Flush L-Pockets: Recessed anchorage ideal for modern composite floors.
Covered L-Pockets: Recessed anchorage featuring a cover that keeps it clear of debris.
APPLICATION & AVAILABILITY
Vehicle Applications:
School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
Regional Availability:
Worldwide
Brochure
Warranty
The 3 Variants of L-Pockets:
OMNI APPROVED!
OMNI APPROVED L-Track, Slide ‘N Click and L-Pocket Anchorages can now be used with both Q’STRAINT & SURE-LOK retractors!*
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
*IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
L-Pockets Features & Details
Features
Flush L-Pocket
The Flush L-Pocket is the a recessed L-Track pocket with a single bolt design. Designed to recess only 3/8” (9.5mm) the pocket is ideal for modern composite floors and features sweeping guides on each side to allow for easy cleaning.
Oval L-Pocket
The sleek design of the Oval L-Pocket minimizes tripping and interference with wheelchair casters. Side L-Track guides keep your tie-down fittings centered and secured. A single bolt installation and surface mount design eliminates the need to modify flooring surfaces.
Covered L-Pocket
The Covered L-Pocket is a recessed L-Track anchorage that works with most typical floor applications of 1/2” (13mm) and stays free of debris when not in use. An integrated magnet securely holds the hinged cover in the closed position and installation requires just two bolts.
Fixed Securement
All 3 versions of L-Pockets can be installed in any vehicle application, providing permanent anchorage points in virtually any environment.
OMNI Approved
You can use L-Pocket Anchorages with all Q’STRAINT QRT-Series Retractors as well as all SURE-LOK Retractors.
Maximum Durbaility
Every L-Pocket Anchorage is made from cast steel for maximum strength and corrosion resistance.
Specifications
L-Pockets Meet or exceed the following standards and regulations:
ADA
Americans with Disabilities Act (ADA) –
“Accessibility Specifications for Transportation Vehicles”
Applicable NHTSA Federal Motor Vehicles Safety Standards
RESNA Vol. 4, Sec.18 Formerly SAEJ2249 – Recommended Practice –
Wheelchair Tie-down and Occupant Restraint Systems for use in Motor Vehicles
ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons –
Wheelchair Tie-down and Occupant Restraint Systems
Canadian Standard Association (CSA) –
“Mobility Aid and Occupant Restraint (MASOR) systems”
Fixed Securement Anchorages
Oval L-Pockets: Small, discreet anchorage that sits on the floor surface.
Flush L-Pockets: Recessed anchorage ideal for modern composite floors.
Covered L-Pockets: Recessed anchorage featuring a cover that keeps it clear of debris.
APPLICATION & AVAILABILITY
Vehicle Applications:
School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
Regional Availability:
Worldwide
Brochure
Warranty
The 3 Variants of L-Pockets:
OMNI APPROVED!
OMNI APPROVED L-Track, Slide ‘N Click and L-Pocket Anchorages can now be used with both Q’STRAINT & SURE-LOK retractors!*
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
*IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
L-Pockets Features & Details
Features
Flush L-Pocket
The Flush L-Pocket is the a recessed L-Track pocket with a single bolt design. Designed to recess only 3/8” (9.5mm) the pocket is ideal for modern composite floors and features sweeping guides on each side to allow for easy cleaning.
Oval L-Pocket
The sleek design of the Oval L-Pocket minimizes tripping and interference with wheelchair casters. Side L-Track guides keep your tie-down fittings centered and secured. A single bolt installation and surface mount design eliminates the need to modify flooring surfaces.
Covered L-Pocket
The Covered L-Pocket is a recessed L-Track anchorage that works with most typical floor applications of 1/2” (13mm) and stays free of debris when not in use. An integrated magnet securely holds the hinged cover in the closed position and installation requires just two bolts.
Fixed Securement
All 3 versions of L-Pockets can be installed in any vehicle application, providing permanent anchorage points in virtually any environment.
OMNI Approved
You can use L-Pocket Anchorages with all Q’STRAINT QRT-Series Retractors as well as all SURE-LOK Retractors.
Maximum Durbaility
Every L-Pocket Anchorage is made from cast steel for maximum strength and corrosion resistance.
Specifications
L-Pockets Meet or exceed the following standards and regulations:
ADA
Americans with Disabilities Act (ADA) –
“Accessibility Specifications for Transportation Vehicles”
Applicable NHTSA Federal Motor Vehicles Safety Standards
RESNA Vol. 4, Sec.18 Formerly SAEJ2249 – Recommended Practice –
Wheelchair Tie-down and Occupant Restraint Systems for use in Motor Vehicles
ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons –
Wheelchair Tie-down and Occupant Restraint Systems
Canadian Standard Association (CSA) –
“Mobility Aid and Occupant Restraint (MASOR) systems”
Fixed Securement Anchorages
Oval L-Pockets: Small, discreet anchorage that sits on the floor surface.
Flush L-Pockets: Recessed anchorage ideal for modern composite floors.
Covered L-Pockets: Recessed anchorage featuring a cover that keeps it clear of debris.
APPLICATION & AVAILABILITY
Vehicle Applications:
School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
Regional Availability:
Worldwide
Brochure
Warranty
The 3 Variants of L-Pockets:
OMNI APPROVED!
OMNI APPROVED L-Track, Slide ‘N Click and L-Pocket Anchorages can now be used with both Q’STRAINT & SURE-LOK retractors!*
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
*IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
L-Pockets Features & Details
Features
Flush L-Pocket
The Flush L-Pocket is the a recessed L-Track pocket with a single bolt design. Designed to recess only 3/8” (9.5mm) the pocket is ideal for modern composite floors and features sweeping guides on each side to allow for easy cleaning.
Oval L-Pocket
The sleek design of the Oval L-Pocket minimizes tripping and interference with wheelchair casters. Side L-Track guides keep your tie-down fittings centered and secured. A single bolt installation and surface mount design eliminates the need to modify flooring surfaces.
Covered L-Pocket
The Covered L-Pocket is a recessed L-Track anchorage that works with most typical floor applications of 1/2” (13mm) and stays free of debris when not in use. An integrated magnet securely holds the hinged cover in the closed position and installation requires just two bolts.
Fixed Securement
All 3 versions of L-Pockets can be installed in any vehicle application, providing permanent anchorage points in virtually any environment.
OMNI Approved
You can use L-Pocket Anchorages with all Q’STRAINT QRT-Series Retractors as well as all SURE-LOK Retractors.
Maximum Durbaility
Every L-Pocket Anchorage is made from cast steel for maximum strength and corrosion resistance.
Specifications
L-Pockets Meet or exceed the following standards and regulations:
ADA
Americans with Disabilities Act (ADA) –
“Accessibility Specifications for Transportation Vehicles”
Applicable NHTSA Federal Motor Vehicles Safety Standards
RESNA Vol. 4, Sec.18 Formerly SAEJ2249 – Recommended Practice –
Wheelchair Tie-down and Occupant Restraint Systems for use in Motor Vehicles
ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons –
Wheelchair Tie-down and Occupant Restraint Systems
Canadian Standard Association (CSA) –
“Mobility Aid and Occupant Restraint (MASOR) systems”
Fixed Securement Anchorages
Oval L-Pockets: Small, discreet anchorage that sits on the floor surface.
Flush L-Pockets: Recessed anchorage ideal for modern composite floors.
Covered L-Pockets: Recessed anchorage featuring a cover that keeps it clear of debris.
APPLICATION & AVAILABILITY
Vehicle Applications:
School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
Regional Availability:
Worldwide
Brochure
Warranty
The 3 Variants of L-Pockets:
OMNI APPROVED!
OMNI APPROVED L-Track, Slide ‘N Click and L-Pocket Anchorages can now be used with both Q’STRAINT & SURE-LOK retractors!*
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
*IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
L-Pockets Features & Details
Features
Flush L-Pocket
The Flush L-Pocket is the a recessed L-Track pocket with a single bolt design. Designed to recess only 3/8” (9.5mm) the pocket is ideal for modern composite floors and features sweeping guides on each side to allow for easy cleaning.
Oval L-Pocket
The sleek design of the Oval L-Pocket minimizes tripping and interference with wheelchair casters. Side L-Track guides keep your tie-down fittings centered and secured. A single bolt installation and surface mount design eliminates the need to modify flooring surfaces.
Covered L-Pocket
The Covered L-Pocket is a recessed L-Track anchorage that works with most typical floor applications of 1/2” (13mm) and stays free of debris when not in use. An integrated magnet securely holds the hinged cover in the closed position and installation requires just two bolts.
Fixed Securement
All 3 versions of L-Pockets can be installed in any vehicle application, providing permanent anchorage points in virtually any environment.
OMNI Approved
You can use L-Pocket Anchorages with all Q’STRAINT QRT-Series Retractors as well as all SURE-LOK Retractors.
Maximum Durbaility
Every L-Pocket Anchorage is made from cast steel for maximum strength and corrosion resistance.
Specifications
L-Pockets Meet or exceed the following standards and regulations:
ADA
Americans with Disabilities Act (ADA) –
“Accessibility Specifications for Transportation Vehicles”
Applicable NHTSA Federal Motor Vehicles Safety Standards
RESNA Vol. 4, Sec.18 Formerly SAEJ2249 – Recommended Practice –
Wheelchair Tie-down and Occupant Restraint Systems for use in Motor Vehicles
ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons –
Wheelchair Tie-down and Occupant Restraint Systems
Canadian Standard Association (CSA) –
“Mobility Aid and Occupant Restraint (MASOR) systems”
Comments are closed.
